EMP 38 to 121
A cooling tower is a device that is designed to transfer heat from the specific manufacturing process of the atmosphere by the means of heat dissipation evaporative by lowering the temperature of the circulating water.
All models INDUSTRY STRUCTURE OF THE MIXED PULTRUDADA) 38, 45, 55, 68, 76, 86, 100 121with a circulation of air being sucked into the current of the water, and have a vent in a way that is induced, that is, from the inside to the outside, with funding from the air, the landscape, and the discharge of the air in the vertical upward movement, through the fan, low power consumption, up close in the GRP (Polyester Reinforced with Fiber Glass, and a bowl of chilled water in a concrete bollards, and beams up to the top of the diffuser in the FRP Pultrudado.
Get in touch with the team at the ALFATERM and schedule a service visit from one of our experienced engineers!
EMP 38
| Model | EMP 38 | ||
|---|---|---|---|
| A | 3560 | ||
| B | 5600 | ||
| C | 6760 | ||
| D | 6550 | ||
| E | 6550 | ||
| F | 7 | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2390 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 4680 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 6000 | |
| Oper. | 9120 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|
EMP 45
| Model | EMP 45 | ||
|---|---|---|---|
| A | 3900 | ||
| B | 6600 | ||
| C | 6600 | ||
| D | 6745 | ||
| E | 6745 | ||
| F | 7 | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2390 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 4745 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 6800 | |
| Oper. | 10350 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|
EMP 55
| Model | EMP 55 | ||
|---|---|---|---|
| A | 4400 | ||
| B | 7500 | ||
| C | 7500 | ||
| D | 7680 | ||
| E | 7680 | ||
| F | N | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2390 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 5290 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 8200 | |
| Oper. | 12500 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|
EMP 68
| Model | EMP 68 | ||
|---|---|---|---|
| A | 4900 | ||
| B | 8350 | ||
| C | 8350 | ||
| D | 8660 | ||
| E | 8660 | ||
| F | 7 | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2390 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 5225 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 9800 | |
| Oper. | 14900 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|
EMP 76
| Model | EMP 76 | ||
|---|---|---|---|
| A | 5700 | ||
| B | 8640 | ||
| C | 8640 | ||
| D | 8960 | ||
| E | 8960 | ||
| F | N | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2570 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 5225 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 11500 | |
| Oper. | 16600 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|
EMP 86
| Model | EMP 86 | ||
|---|---|---|---|
| A | 6100 | ||
| B | 9300 | ||
| C | 9300 | ||
| D | 9610 | ||
| E | 9610 | ||
| F | 7 | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2570 | ||
| 3 | |||
| 4 | 2670 | ||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 5225 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 12100 | |
| Oper. | 18400 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|
EMP 100
| Model | EMP 100 | ||
|---|---|---|---|
| A | 6100 | ||
| B | 10080 | ||
| C | 10080 | ||
| D | 10390 | ||
| E | 10390 | ||
| F | 7 | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2570 | ||
| 3 | |||
| 4 | 2670 | ||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 5225 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 13700 | |
| Oper. | 20900 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|
EMP 121
| Model | EMP 121 | ||
|---|---|---|---|
| A | 7000 | ||
| B | 11000 | ||
| C | 11000 | ||
| D | 11310 | ||
| E | 11310 | ||
| F | 7 | ||
| G | |||
| Number of layers of filler | |||
| 2 | 2570 | ||
| 3 | |||
| 4 | 2670 | ||
| 5 | |||
| 6 | |||
| H | |||
| Number of layers of filler | |||
| 2 | 5425 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| with the fan weight (KG) | Emb. | 15500 | |
| Oper. | 23600 | ||
| 01. | The DIAMETER AND the HOLE for THE CONNECTION OF the WATER INLET ACCORDING to the STANDARD ANSI B16.5 (#150 LBS.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 03. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 04. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 05. | THE HEIGHT OF THE BASIN, THE "I" IS TO BE DEFINED BY THE CUSTOMER'S | ||||||||||||||
| 06. | OPTIONALLY, THE TOWER CAN ALSO BE SUPPLIED WITH A LADDER AND A BRIDGE TO THE DIFFUSER AND FAN | ||||||||||||||
| 07. | THE SIZE OF THE "F" REFERRING TO THE TIME OF THE ENTRY OF THE AIR, WHICH VARIES ACCORDING TO THE OPERATING CONDITIONS | ||||||||||||||
| 08. | THE CUSTOMER WILL HAVE TO PROVIDE A VALVE FOR CONTROLLING THE FLOW OF HOT WATER | ||||||||||||||
| 09. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 10. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 11. | THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 12. | SUBJECT TO CHANGE WITHOUT NOTICE PRIOR | ||||||||||||||
| An example of a specification |
|