• +55 (11) 4156-8930
  • vendas@alfaterm.com.br
Technical Data Sheet
Make on a budget

CZ 20 to 80

A cooling tower is a device that is designed to transfer heat from the specific manufacturing process of the atmosphere by the means of heat dissipation evaporative by lowering the temperature of the circulating water.

All models The LOCAL CURRENT, the CROSS) to 20, 40, 60, 80are manufactured from GRP (Polyester Reinforced fiberglass, with the introduction of the air blown into the current cross-referenced to the water, and have a vent in a forced manner, that is, from the outside to the inside, with a catchment, and the discharge of the air in a horizontal position so that the air flow is directed perpendicular to the water flow entering one or more vertical faces of the structure, and covering the whole height of the tower by the fan is an axial or centrifugal fan, and is suitable for water with a higher concentration of solids as a function of the ease of cleaning of the components and of the system of distribution of water in the channels that are open. 

Get in touch with the team at the ALFATERM and schedule a service visit from one of our experienced engineers!

CZ 20

ModelCZ 20
A720
B1900
C900
D2250
E1140
F1550
G1760
H260
I1108
J1350
L3480
M1300
Connections
V1"
W2"
X2"
Y2"
Z3/4"
The Volume of the water in the bowl(L)400
with the fan weight (KG)Emb.230
Oper.730
with the fan-wheel weight (KG)Emb.350
Oper.850
01. THE CONNECTION TO THE V = DRAIN, THREADED BSP
02. CONNECT W OVERFLOW, THE THREAD BSP
03. THE CONNECTION TO THE X = THE ENTRANCE TO THE HOT WATER
04. THE CONNECTION OF THE Y = OUTPUT OF COLD WATER
05. CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE)
06. CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER
07. DIMENSIONS ARE IN MILLIMETERS (INCHES), UNLESS SPECIFICALLY STATED TO THE CONTRARY
08. L. F. A. = MAXIMUM SUPPLY ALFATERM
09. PROVIDE SUPPORT TO THE PIPING
10. HEIGHT OF THE BASE OF SUPPORT OF THE TOWER IS DEFINED BY THE CLIENT, AND IT SHOULD BE FLAT, SMOOTH AND LEVEL
11. PROVIDE FOR THE INSTALLATION OF A TOWER FAN TO BREATHE NEW LIFE INTO THE AIR, IN FAVOR OF THE BARRIERS TO THE FLOW OF AIR TO THE
12. ANCHOR BOLT AND THE MOUNTING OF THE FAN WHEEL IN THE DATABASE FOR THE CLIENT
13. THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET
14. 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
15. 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
16. SUBJECT TO CHANGE WITHOUT NOTICE PRIOR
An example of a specification
The Current Cross -CZ
Model20
Number of layers of filler2
Engine power4
No. of poles in the motor6
Type of fillerCOLOR
Axial fan or centrifugal fanA / C

CZ 40

ModelCZ 40
A920
B2200
C1100
D2550
E1340
F2060
G2260
H360
I1213
J1560
L3813
M1500
Connections
V1"
W2"
X3"
Y3"
Z3/4"
The Volume of the water in the bowl(L)800
with the fan weight (KG)Emb.450
Oper.1410
with the fan-wheel weight (KG)Emb.605
Oper.1565
01. THE CONNECTION TO THE V = DRAIN, THREADED BSP
02. CONNECT W OVERFLOW, THE THREAD BSP
03. THE CONNECTION TO THE X = THE ENTRANCE TO THE HOT WATER
04. THE CONNECTION OF THE Y = OUTPUT OF COLD WATER
05. CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE)
06. CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER
07.  DIMENSIONS ARE IN MILLIMETERS (INCHES), UNLESS SPECIFICALLY STATED TO THE CONTRARY
08. L. F. A. = MAXIMUM SUPPLY ALFATERM
09. PROVIDE SUPPORT TO THE PIPING
10. HEIGHT OF THE BASE OF SUPPORT OF THE TOWER IS DEFINED BY THE CLIENT, AND IT SHOULD BE FLAT, SMOOTH AND LEVEL
11. PROVIDE FOR THE INSTALLATION OF A TOWER FAN TO BREATHE NEW LIFE INTO THE AIR, IN FAVOR OF THE BARRIERS TO THE FLOW OF AIR TO THE
12. ANCHOR BOLT AND THE MOUNTING OF THE FAN WHEEL IN THE DATABASE FOR THE CLIENT
13. THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET
14. 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
15. 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
16. SUBJECT TO CHANGE WITHOUT NOTICE PRIOR
An example of a specification
The Current Cross -CZ
Model40
Number of layers of filler2
Engine power4
No. of poles in the motor6
Type of fillerCOLOR
Axial fan or centrifugal fanA / C

CZ 60

ModelCZ 60
A1300
B2200
C1500
D2650
E1740
F2520
G2700
H360
I1608
J2012
L4208
M1900
Connections
V1"
W2"
X3"
Y4"
Z3/4"
The Volume of the water in the bowl(L)1100
with the fan weight (KG)Emb.780
Oper.2080
with the fan-wheel weight (KG)Emb.1060
Oper.2360
01. THE CONNECTION TO THE V = DRAIN, THREADED BSP
02. CONNECT W OVERFLOW, THE THREAD BSP
03. THE CONNECTION TO THE X = THE ENTRANCE TO THE HOT WATER
04. THE CONNECTION OF THE Y = OUTPUT OF COLD WATER
05. CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE)
06. CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER
07. DIMENSIONS ARE IN MILLIMETERS (INCHES), UNLESS SPECIFICALLY STATED TO THE CONTRARY
08. L. F. A. = MAXIMUM SUPPLY ALFATERM
09. PROVIDE SUPPORT TO THE PIPING
10. HEIGHT OF THE BASE OF SUPPORT OF THE TOWER IS DEFINED BY THE CLIENT, AND IT SHOULD BE FLAT, SMOOTH AND LEVEL
11. PROVIDE FOR THE INSTALLATION OF A TOWER FAN TO BREATHE NEW LIFE INTO THE AIR, IN FAVOR OF THE BARRIERS TO THE FLOW OF AIR TO THE
12. ANCHOR BOLT AND THE MOUNTING OF THE FAN WHEEL IN THE DATABASE FOR THE CLIENT
13. THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET
14. 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
15. 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
16. SUBJECT TO CHANGE WITHOUT NOTICE PRIOR
An example of a specification
The Current Cross -CZ
Model60
Number of layers of filler2
Engine power4
No. of poles in the motor6
Type of fillerCOLOR
Axial fan or centrifugal fanA / C

CZ 80

ModelCZ 80
A1600
B2200
C2000
D2650
E2240
F2520
G2700
H360
I1758
J2235
L4358
M2400
Connections
V1"
W2"
X4"
Y4"
Z3/4"
The Volume of the water in the bowl(L)1500
with the fan weight (KG)Emb.1100
Oper.2850
with the fan-wheel weight (KG)Emb.1440
Oper.3190
01. THE CONNECTION TO THE V = DRAIN, THREADED BSP
02. CONNECT W OVERFLOW, THE THREAD BSP
03. THE CONNECTION TO THE X = THE ENTRANCE TO THE HOT WATER
04. THE CONNECTION OF THE Y = OUTPUT OF COLD WATER
05. CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE)
06. CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER
07. DIMENSIONS ARE IN MILLIMETERS (INCHES), UNLESS SPECIFICALLY STATED TO THE CONTRARY
08. L. F. A. = MAXIMUM SUPPLY ALFATERM
09. PROVIDE SUPPORT TO THE PIPING
10. HEIGHT OF THE BASE OF SUPPORT OF THE TOWER IS DEFINED BY THE CLIENT, AND IT SHOULD BE FLAT, SMOOTH AND LEVEL
11. PROVIDE FOR THE INSTALLATION OF A TOWER FAN TO BREATHE NEW LIFE INTO THE AIR, IN FAVOR OF THE BARRIERS TO THE FLOW OF AIR TO THE
12. ANCHOR BOLT AND THE MOUNTING OF THE FAN WHEEL IN THE DATABASE FOR THE CLIENT
13. THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET
14. 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
15. 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2
16. SUBJECT TO CHANGE WITHOUT NOTICE PRIOR
An example of a specification
The Current Cross -CZ
Model80
Number of layers of filler2
Engine power4
No. of poles in the motor6
Type of fillerCOLOR
Axial fan or centrifugal fanA / C
The very first choice in the cooling water.
  • +55 (11) 4156-8930
  • vendas@alfaterm.com.br
  • Av. Ten. Marques, 6529 - Antigo 5490
    Chácara do Solar I (Fazendinha)
    Santana de Parnaíba - SP, 06530-001

© 2024 ALFATERM | Todos os direitos reservados.

Desenvolvimento: MKT FLOW | Spherea