ASP 1070 to 5500
A cooling tower is a device that is designed to transfer heat from the specific manufacturing process of the atmosphere by the means of heat dissipation evaporative by lowering the temperature of the circulating water.
All models FUTURE ASPIRATION) 1070, 1400, 1800, 2100, 2400, 3100, 3800, 4500 and 5500with a circulation of air being sucked into the current of the water, and have a vent in a way that is induced, that is, from the inside to the outside, with funding from the air, the landscape, and the discharge of the air in the vertical upward movement through the axial fan with low power consumption. Manufactured in GRP (Polyester Reinforced with Fiber Glass), are characterized by a high resistance to corrosion and they are designed in a variety of sizes, from being shipped completely disassembled, requiring the performance of services for the assembly and installation in the field.
Get in touch with the team at the ALFATERM and schedule a service visit from one of our experienced engineers!
ASP 1070
| Model | ASP 1070 | ||
|---|---|---|---|
| A | 1900 | ||
| The Inner Tower | |||
| B | 3220 | ||
| C | 3220 | ||
| The Outer Tower | |||
| D | 3340 | ||
| E | 3340 | ||
| F | 700 | ||
| G | 50 | ||
| H | 560 | ||
| I | 500 | ||
| J | 180 | ||
| K | 300 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 3930 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 5225 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 3720 | ||
| O | 3720 | ||
| P | 3430 | ||
| Q | 3430 | ||
| R | 3720 | ||
| S | 3720 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | 8" | ||
| Y | 8" | ||
| The Volume of the water in the bowl | (L) | 4900 | |
| with the fan weight (KG) | Emb. | 2260 | |
| Oper. | 7600 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|
ASP 1400
| Model | ASP 1400 | ||
|---|---|---|---|
| A | 2250 | ||
| The Inner Tower | |||
| B | 3700 | ||
| C | 3700 | ||
| The Outer Tower | |||
| D | 3820 | ||
| E | 3820 | ||
| F | 650 | ||
| G | 50 | ||
| H | 560 | ||
| I | 500 | ||
| J | 220 | ||
| K | 300 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 3900 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 5400 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 4200 | ||
| O | 4200 | ||
| P | 3910 | ||
| Q | 3910 | ||
| R | 4200 | ||
| S | 4200 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | 10" | ||
| Y | 10" | ||
| The Volume of the water in the bowl | (L) | 6430 | |
| with the fan weight (KG) | Emb. | 2580 | |
| Oper. | 10500 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|
ASP 1800
| Model | ASP 1800 | ||
|---|---|---|---|
| A | 2500 | ||
| The Inner Tower | |||
| B | 4200 | ||
| C | 4200 | ||
| The Outer Tower | |||
| D | 4320 | ||
| E | 4320 | ||
| F | 650 | ||
| G | 50 | ||
| H | 560 | ||
| I | 500 | ||
| J | 220 | ||
| K | 300 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 4450 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 6130 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 4700 | ||
| O | 4700 | ||
| P | 4410 | ||
| Q | 4410 | ||
| R | 4700 | ||
| S | 4700 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | 10" | ||
| Y | 10" | ||
| The Volume of the water in the bowl | (L) | 8290 | |
| with the fan weight (KG) | Emb. | 3260 | |
| Oper. | 12800 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON SCALE-OUT AS NB TO 18 | ||||||||||||||
| An example of a specification |
|
ASP 2100
| Model | ASP 2100 | ||
|---|---|---|---|
| A | 2500 | ||
| The Inner Tower | |||
| B | 4200 | ||
| C | 4980 | ||
| The Outer Tower | |||
| D | 4320 | ||
| E | 5100 | ||
| F | 650 | ||
| G | 50 | ||
| H | 560 | ||
| I | 500 | ||
| J | 220 | ||
| K | 300 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 4450 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 6130 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 4700 | ||
| O | 5480 | ||
| P | 4410 | ||
| Q | 5190 | ||
| R | 4700 | ||
| S | 5480 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | 10" | ||
| Y | 10" | ||
| The Volume of the water in the bowl | (L) | 9830 | |
| with the fan weight (KG) | Emb. | 3620 | |
| Oper. | 14950 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|
ASP-2400
| Model | ASP-2400 | ||
|---|---|---|---|
| A | 2980 | ||
| The Inner Tower | |||
| B | 4980 | ||
| C | 4980 | ||
| The Outer Tower | |||
| D | 5100 | ||
| E | 5100 | ||
| F | 600 | ||
| G | 50 | ||
| H | 560 | ||
| I | 500 | ||
| J | NOTE 19 | ||
| K | 1260 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 4450 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 6715 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 5480 | ||
| O | 5480 | ||
| P | 5190 | ||
| Q | 5190 | ||
| R | 5480 | ||
| S | 5480 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | NOTE 18 | ||
| Y | NOTE 18 | ||
| The Volume of the water in the bowl | (L) | 11650 | |
| with the fan weight (KG) | Emb. | 4320 | |
| Oper. | 17700 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|
ASP-3100
| Model | ASP-3100 | ||
|---|---|---|---|
| A | 3600 | ||
| The Inner Tower | |||
| B | 5600 | ||
| C | 5600 | ||
| The Outer Tower | |||
| D | 5720 | ||
| E | 5720 | ||
| F | 600 | ||
| G | 50 | ||
| H | 640 | ||
| I | 580 | ||
| J | NOTE 19 | ||
| K | 1275 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 4650 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 6640 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 6100 | ||
| O | 6100 | ||
| P | 5810 | ||
| Q | 5810 | ||
| R | 6100 | ||
| S | 6100 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | NOTE 18 | ||
| Y | NOTE 18 | ||
| The Volume of the water in the bowl | (L) | 18180 | |
| with the fan weight (KG) | Emb. | 5650 | |
| Oper. | 25650 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|
ASP-3800
| Model | ASP-3800 | ||
|---|---|---|---|
| A | 3600 | ||
| The Inner Tower | |||
| B | 5600 | ||
| C | 6580 | ||
| The Outer Tower | |||
| D | 5720 | ||
| E | 6700 | ||
| F | 600 | ||
| G | 50 | ||
| H | 640 | ||
| I | 580 | ||
| J | NOTE 19 | ||
| K | 1275 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 4650 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 6640 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 6100 | ||
| O | 7080 | ||
| P | 5810 | ||
| Q | 6790 | ||
| R | 6100 | ||
| S | 7080 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | NOTE 18 | ||
| Y | NOTE 18 | ||
| The Volume of the water in the bowl | (L) | 21300 | |
| with the fan weight (KG) | Emb. | 8200 | |
| Oper. | 31600 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|
ASP 4500
| Model | ASP 4500 | ||
|---|---|---|---|
| A | 3980 | ||
| The Inner Tower | |||
| B | 6580 | ||
| C | 6580 | ||
| The Outer Tower | |||
| D | 6700 | ||
| E | 6700 | ||
| F | 600 | ||
| G | 50 | ||
| H | 640 | ||
| I | 580 | ||
| J | NOTE 19 | ||
| K | 1850 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 4650 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 6810 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 7080 | ||
| O | 7080 | ||
| P | 6790 | ||
| Q | 6790 | ||
| R | 7080 | ||
| S | 7080 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | NOTE 18 | ||
| Y | NOTE 18 | ||
| The Volume of the water in the bowl | (L) | 25100 | |
| with the fan weight (KG) | Emb. | 13800 | |
| Oper. | 41900 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|
ASP-5500
| Model | ASP-5500 | ||
|---|---|---|---|
| A | 4480 | ||
| The Inner Tower | |||
| B | 7230 | ||
| C | 7230 | ||
| The Outer Tower | |||
| D | 7350 | ||
| E | 7350 | ||
| F | 600 | ||
| G | 50 | ||
| H | 640 | ||
| I | 580 | ||
| J | NOTE 19 | ||
| K | 950 | ||
| L | |||
| Number of layers of filler | |||
| 2 | 4650 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| M | |||
| Number of layers of filler | |||
| 2 | 6810 | ||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| N | 7730 | ||
| O | 7730 | ||
| P | 7440 | ||
| Q | 7440 | ||
| R | 7730 | ||
| S | 7730 | ||
| T | 250 | ||
| Connections | |||
| Connection thread BPS | |||
| V | 1" | ||
| W | 2" | ||
| Z | 2" | ||
| FLANGE | |||
| X | NOTE 18 | ||
| Y | NOTE 18 | ||
| The Volume of the water in the bowl | (L) | 30310 | |
| with the fan weight (KG) | Emb. | 14300 | |
| Oper. | 37900 | ||
| 01. | THE CONNECTION TO THE V = DRAIN, THREADED BSP | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 02. | CONNECT W OVERFLOW, THE THREAD BSP | ||||||||||||||
| 03. | The CONNECTION to the X = the ENTRANCE TO the HOT WATER ACCORDING to ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 04. | The CONNECTION of the Y = OUTPUT OF COLD WATER, AS per ANSI STANDARD B16.5 (#150 LBS.) | ||||||||||||||
| 05. | CONNECTION TO Z-THE ENTRANCE TO THE WATER OF A REPLACEMENT, FAUCET SINGLE) | ||||||||||||||
| 06. | CONNECTIONS TO THE INLET AND THE OUTLET OF THE WATER THROUGH THE HOSE AND RUBBER | ||||||||||||||
| 07. | DIMENSIONS ARE IN MILLIMETERS (INCHES) | ||||||||||||||
| 08. | L. F. A. = MAXIMUM SUPPLY ALFATERM | ||||||||||||||
| 09. | PROVIDE SUPPORT TO THE PIPING | ||||||||||||||
| 10. | THE CONSTRUCTION OF THE SUPPORT BASE OF THE TOWER IS EXPECTED TO BE IN THE CONCRETE / MASONRY, FLAT, LEVEL AND OF THE RESPONSIBILITY OF THE CUSTOMER | ||||||||||||||
| 11. | ANY OBSTACLE IN THE VICINITY OF THE TOWER, YOU MUST HAVE THE APPROVAL OF THE ALFATERM | ||||||||||||||
| 12. | THE PRESSURE REQUIRED AT THE INLET OF THE DOMESTIC HOT WATER, ACCORDING TO THE DATA SHEET | ||||||||||||||
| 13. | 'COLOR' = - FILLING-TYPE BLOCKS AND BARS IN THE SHAPE OF THE WAVES CROSSED, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 14. | 'BUS RAPID TRANSIT'=, FILLING TYPE, THE BARS OF A DROP-TUBE, POLYPROPYLENE, POLYPROPYLENE, ANTI-FLAME, V-0 OR POLYPROPYLENE, ANTI-FLAME AND V-2 | ||||||||||||||
| 15. | 'PUT'=, FILLING TYPE, BLOCKS, FILM, PVC, | ||||||||||||||
| 16. | TROUGH SINK FOR DROP, BUILT-IN | ||||||||||||||
| 17. | OBSERVE THE MINIMUM DISTANCE AND A MAXIMUM HEIGHT OF 1500 MM FOR WALLS AND OBSTACLES | ||||||||||||||
| 18. | THE DIAMETERS OF THE X AND Y, SIZED ACCORDING TO THE FLOW OF THE DESIGN PROVIDED BY THE CUSTOMER | ||||||||||||||
| 19. | THE DIMENSION OF K IS DIRECTLY DEPENDENT ON THE SIZING AS PER NOTE 18. | ||||||||||||||
| An example of a specification |
|